付鹏哲1 ,赵迪文 2 ,刘玉2.航空发动机机匣螺栓连接结构简化模型修正[J].航空发动机,2024,50(3):98-102
航空发动机机匣螺栓连接结构简化模型修正
Simplified Model Updating of Bolted Connection Structure of Aeroengine Casing
  
DOI:
中文关键词:  螺栓连接结构  有限元建模  模态测试  模型修正  机匣  航空发动机
英文关键词:bolted connection structure  finite element modeling  modal testing  model updating  casing  aeroengine
基金项目:国家级研究项目、辽宁省教育厅面上项目(JYT2020053)、沈阳航空航天大学博士启动基金(19YB39)资助
作者单位
付鹏哲1 ,赵迪文 2 ,刘玉2 1.中国航发沈阳发动机研究所沈阳110015 2.沈阳航空航天大学 航空发动机学院沈阳 110136 
摘要点击次数: 203
全文下载次数: 189
中文摘要:
      为了提高航空发动机机匣螺栓连接结构动力学模型修正效率,基于模态置信准则(MAC),提出了一种基于实体振型的 动力学参数简化模型修正技术,采用该技术对发动机机匣典型螺栓连接结构有限元参数模型进行了修正。通过模态测试获得实 际机匣的模态信息,并与有限元实体模型模态进行比较,利用实体模型模态信息筛选修正参数,采用参数化响应面优化方法对机 匣动力学简化模型进行修正。结果表明:基于实体振型的动力学参数简化模型修正技术可以避免对模型进行多次调用,提高了简 化模型修正效率;具有较高的修正精度,修正后的典型螺栓连接结构简化模型准确性明显提高约11%。该修正技术进一步完善后 可用于航空发动机整机动力学分析、故障分析等。
英文摘要:
      In order to improve the efficiency of dynamic model updating of bolted connection structures of aeroengine casing, a simplified model updating technique based on solid mode shape was proposed based on modal assurance criterion (MAC), and the finite element parameter models of typical bolted connection structures of aeroengine casings were updated by this technique. The modal informa? tion of the actual casing is obtained through modal testing, and compared with the modes of the finite element solid model. The modal information of the solid model is used to screen the updating parameters, and the simplified casing dynamic model is updated by the parametric response surface optimization method. The results show that the simplified model updating technology of dynamic parameters based on solid model vibration modes can avoid multiple calls to the model and improve the updating efficiency of the simplified model. The accuracy of the updated simplified model of a typical bolted connection structure is significantly improved by about 11%. After further improvement, the updating technology can be used for dynamic analysis and fault analysis of aeroengines.
查看全文  查看/发表评论  下载PDF阅读器